Renovating or replacing an old toilet alone must be a hectic job to do alone. You can take professional help from the plumber in Geelong for reliable service at an affordable price. There are many plumbing agencies in Geelong that you can contact directly and get immediate quotes.
You can browse the internet to collect information on the best plumbing agencies in Geelong. After you gather all the necessary information, you will be able to select the most reliable service provider among all the plumbing agencies by comparing their ratings.
What is the cost of toilet installation?
A plumber in Geelong could charge you from $ 150 to $ 250 to install a toilet. However, if you are replacing the old toilet, you may need to buy a completely new set-up along with the fittings which are your extra cost other than the plumber’s service charges. In Geelong, Australia, a plumber may charge you around $ 70 per hour of work which is the standard plumbing service charge.
However, depending on work and location, these charges will vary. Also, charges may depend on the functionalities of the toilet that you are going to install.
If the toilet you are going to install has modern fittings and is a smart toilet, then the installation charge may go to the higher side. If your toilet is a simple one, the plumber will charge you according to their normal service rates.
How to install a toilet by yourself?
You can always choose to do the toilet installation chores by yourself. To install a new toilet, at first you need to arrange the following things –
- Gloves
- Mask
- Wrench
- Old towel and rags
- Plastic bag
- Hacksaw
- Wax ring
- New supply line
- A bucket
- Bolts and washers
- Caulk and caulk gun
- Utility knife
- Potty knife or plastic scraper
- Screwdriver
- Plunger
Toilet installation process
- Step 1: Wrap some towels around the toilet in case there is any leak of water
- Step 2: You need to shut down the water supply by closing the valve.
- Step 3: Flush the toilet multiple times so that all water will be drained from the tank.
- Step 4: Use a plunger to remove the water from the toilet bowl, if required.
- Step 5: Now, you need to unscrew the water supply line and collect the remaining water from the pipe with the help of a bucket.
- Step 6: Remove the bolts from each side of the toilet with the help of a screwdriver.
- Step 7: With the help of a utility knife, you can score the old caulk that is used to attach the toilet chair to the ground.
- Step 6: Now remove the toilet chair and place it on the old towel or rag, and by pulling that rag or towel, you can easily move the toilet from your way.
- Step 7: Now, change the old wax ring with the help of a putty knife, clean the entire flange area, and insert the new wax ring here. Also, don’t forget to remove the old nuts and screws and attach new screws instead.
- Step 8: Now, put the new toilet chair in such a way that screws must pass through the hole of the chair.
- Step 9: Now tighten the screws with the nut to fix the toilet base. If the bolts are too big, cut them down with the hacksaw.
- Step 10: Now attach the tank using the bolts provided.
- Step 11: You can now add the new water supply line and switch on the water supply tap.
- Step 12: Do not forget to seal the toilet seat with the help of a Caulk and caulk gun.
That’s it! Your toilet installation will be done. Though you can do it by yourself, it is always better to take help from a professional plumber as you might not have all the tools with you at home.
READ MORE
- Why are bidets essential in every bathroom?
- Things to consider before selecting a marble countertop
- Air Conditioning Facts: Heating and Cooling
